OPAE Installation Guide¶
System compatibility¶
The OPAE SDK has been tested on the following configurations.
- Hardware: tightly coupled FPGA products and programmable FPGA acceleration cards for Intel® Xeon® processors (to be released)
- Operating System: tested on RedHat 7.3, Linux kernels 3.10 through 4.7
- FIM (FPGA Interface Manager): 6.3.0
How to download the OPAE SDK¶
OPAE SDK releases are available on GitHub. There, you can also find the driver source code and DKMS packages for the respective SDK release.
The various componentes of OPAE are available via the following compressed tar files and RPM packages.
- Source packages
opae-<release>.tar.gz (BSD License) (all src for libopae-c, tools, samples, headers and ASE)
opae-sdk-<release>.tar.gz (BSD License) (same as opae-<release>.tar.gz, generated by GitHub)
opae-intel-fpga-drv-<release>.tar.gz (GPLv2 License) (driver sources)
- Binary packages (most can be built from source packages)
opae-all-<release>-1.x86_64.rpm (BSD License) (meta-package for installing all dependent rpms)
opae-<release>-1.x86_64-libs.rpm (BSD License) (libopae-c bin)
opae-<release>-1.x86_64-tools.rpm (BSD License) (all tool bin files)
opae-<release>-1.x86_64-ase.rpm (BSD License) (ASE lib, ASE tools)
opae-<release>-1.x86_64-devel.rpm (BSD License) (header file for libopae-c and sample src file)
opae-intel-fpga-drv-<release>-1.x86_64.rpm (GPLv2 License) (dkms and driver src to generate \*.ko at installation)
Software requirements¶
For building the kernel driver, the kernel development environment is required.
- gcc >= 4.8.5
- cmake >= 2.8
- dkms.noarch (Release is tested with 2.2.0.3-34)
For building libopae-c, tools and samples, the following dependences are required:
- libuuid-devel.x86_64: (tested with 2.23.2-33.el7)
- libuuid.x86_64: (tested with 2.23.2-33.el7)
- json-c-devel.x86_64: json-c-devel-0.11-4.el7_0.x86_64.rpm
- json-c.x86_64: (tested with 0.11-4.el7_0)
- cmake.x86_64: (tested with 2.8.12.2-2.el7)
- boost.x86_64: (tested with 1.53.0-26.el7)
- boost-devel.x86_64: (tested with 1.53.0-26.el7)
Driver installation with DKMS rpm package¶
Install:
$ sudo yum install opae-intel-fpga-drv-<release>.rpm
Uninsall:
$ sudo yum remove opae-intel-fpga-drv-<release>
During the rpm installation process, the tool will compile the driver from source then install the driver automatically. Driver installed by rpm package will be automatically install again after system reboot.
Driver build/installation with driver source package¶
Using the following command to untar the source tar ball:
$ tar zxvf opae-intel-fpga-driver-<release>.tar.gz
Following directory shall be extracted at the working directory where the above command is executed.
opae-intel-fpga-driver-<release>
Build the fpga driver from source with following procedures:
$ cd opae-intel-fpga-driver-<release>
$ make
Following kernel modules shall be generated from source:
- fpga-mgr-mod.ko
- intel-fpga-afu.ko
- intel-fpga-fme.ko
- intel-fpga-pci.ko
Install the above modules in the following order:
$ sudo insmod fpga-mgr-mod.ko
$ sudo insmod intel-fpga-pci.ko
$ sudo insmod intel-fpga-fme.ko
$ sudo insmod intel-fpga-afu.ko
Use lsmod to check if all 4 modules are installed correctly or not:
$ lsmod | grep fpga
Output should look like:
intel_fpga_fme 36864 0
intel_fpga_afu 28672 0
intel_fpga_pci 28672 2 intel_fpga_afu,intel_fpga_fme
fpga_mgr_mod 16384 1 intel_fpga_fme
Remove the driver modules in the following order:
$ sudo rmmod intel-fpga-afu
$ sudo rmmod intel-fpga-fme
$ sudo rmmod intel-fpga-pci
$ sudo rmmod fpga-mgr-mod
OPAE SDK installation with OPAE SDK rpm package¶
The libopae-c library, tools, headers, and the ASE library can be installed using these commands:
$ sudo yum install opae-<release>-1.x86_64-libs.rpm
$ sudo yum install opae-<release>-1.x86_64-tools.rpm
$ sudo yum install opae-<release>-1.x86_64-devel.rpm
$ sudo yum install opae-<release>-1.x86_64-ase.rpm
To uninstall:
$ sudo yum remove opae-<release>-1.x86_64-libs
$ sudo yum remove opae-<release>-1.x86_64-tools
$ sudo yum remove opae-<release>-1.x86_64-devel
$ sudo yum remove opae-<release>-1.x86_64-ase
OPAE SDK build/installation with OPAE SDK source package¶
Using the following command to untar the source tar ball:
$ tar zxvf opae-sdk-<release>.tar.gz
Following directory shall be created at the working directory where the above command is executed.
opae-sdk-<release>
Build the OPAE C library (libopae-c) and the AFU Simulation Environment (ASE) library (libopae-c-ase) from source with following commands:
$ cd opae-sdk-<release>
$ mkdir mybuild
$ cd mybuild
$ cmake .. -DBUILD_ASE=1
$ make
By default, the OPAE SDK will install into /usr/local if you also
issue the following:
make install
You can change this installation prefix from /usr/local into
something else by adding -DCMAKE_INSTALL_PREFIX=<new prefix> to the
cmake command above.
Please see Quick Start Guide on how to run the hello_fpga sample to verify libopae-c & driver are built correctly.
FPGA Device Access Permissions¶
Access to FPGA accelerators and devices is controlled using file access
permissions on the Intel® FPGA device files, /dev/intel-fpga-fme.*
and /dev/intel-fpga-port.*, as well as to the files reachable
through /sys/class/fpga/.
In order to allow regular (non-root) users to access accelerators, you
need to grant them read and write permissions on
/dev/intel/fpga-port.* (with * denoting the respective socket,
i.e. 0 or 1). E.g.:
$ sudo chmod a+rw /dev/inte-fpga-port.0
Memlock limit¶
Depending on the requirements of your application, you may also want to increase the maximum amount of memory a user process is allowed to lock. The exact way to do this depends on your Linux distribution.
You can check the current memlock limit using
$ ulimit -l
A way to permanently remove the limit for locked memory for a regular user is to add the following lines to your /etc/security/limits.conf:
user1 hard memlock unlimited
user1 soft memlock unlimited
This removes the limit on locked memory for user user1. To remove it
for all users, you can replace user1 with *:
* hard memlock unlimited
* soft memlock unlimited
Hupgepage Settings¶
Users need to configure system hugepage to reserve 2MB-hugepages or 1GB-hugepages. For example, the ‘hello_fpga’ sample requires several 2MB-hugepages. And the fpgadiag tool requires several 1GB-hugepages.
The command below reserves 20 2M-hugepages:
$ sudo sh -c ‘echo 20 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages’
The command below reserves 4 1GB-hugepages:
$ sudo sh -c ‘echo 4 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages’
For x86_64 architecture processors, user can use following command to find out avaiable hugepage sizes:
$ grep pse /proc/cpuinfo | uniq flags : … pse …
If this commands returns a non-empty string, 2MB pages are supported.
$ grep pse /proc/cpuinfo | uniq flags : … pdpe1gb …
If this commands returns a non-empty string, 1GB pages are supported.