fpgasupdate¶

SYNOPSIS¶

fpgasupdate [--log-level=<level>] file [bdf]

DESCRIPTION¶

The fpgasupdate command implements a secure firmware update for the following programmable accelerator cards (PACs): * Intel® PAC with Intel Arria® 10 GX FPGA * Intel FPGA PAC D5005 * Intel PAC N3000

--log-level <level>

Specifies the `log-level` which is the level of information output to your command tool.
The following seven levels  are available: `state`, `ioctl`, `debug`, `info`, `warning`,
`error`, `critical`. Setting `--log-level=state` provides the most verbose output.
Setting `--log-level=ioctl` provides the second most information, and so on. The default
level is `info`.

file

Specifies the secure update firmware file to be programmed. This file may be to program a
static region (SR), programmable region (PR), root entry hash, key cancellation, or other
device-specific firmware.

bdf

The PCIe&reg; address of the PAC to program. `bdf` is of the form `[ssss:]bb:dd:f`,
corresponding to PCIe segment, bus, device, function. The segment is optional. If
you do not specify a segment, the segment defaults to `0000`. If the system has only
one PAC you can omit the `bdf` and let `fpgasupdate`  determine the address
automatically.

TROUBLESHOOTING¶

To gather more debug output, decrease the --log-level parameter.

EXAMPLES¶

fpgasupdate firmware.bin fpgasupdate firmware.bin 05:00.0fpgasupdate firmware.bin 0001:04:02.0 --log-level=ioctl

Revision History¶

Document Version	Intel Acceleration Stack Version	Changes
2019.07.26	1.2.1 Beta	Initial release.
2019.10.04	2.0.1 Beta (Supported with Intel Quartus Prime Pro Edition 19.2.)	E ditorial changes only.